+61 2 9756 1781 info@thermal-xr.com

Products

The THERMAL-XR process of preparing, coating and then maintaining the heat exchange surface of condenser coils delivers energy efficiency and long term corrosion protection of valuable assets

The process relies of cleaning, de-rusting and then activating the surface for optimal adhesion of the THERMAL-XR Restore coating. This specific process helps the coatings adhesion guaranteeing long term thermal conductivity and corrosion protection.

The Process

THERMAL-XR Prep

THERMAL-XR Prep

STEP 1: Clean and de-rust the heat exchange surface with TERMAL-XR Prep.

THERMAL-XR Activate

THERMAL-XR Activate

STEP 2: Soak the heat exchange surface with THERMAL-XR Activate for 5 minutes and then rinse off and allow to dry.

THERMAL-XR Restore

THERMAL-XR Restore

STEP 3: Using an airless spray gun or an air assisted spray gun apply 3 even coats of THERMAL-XR Restore to the coil surface as per instructions.

THERMAL-XR Maintain

THERMAL-XR Maintain

STEP 4: Maintain the coating and capacity with regular cleaning and application of
THERMAL-XR Maintain.

These four simple steps deliver

%

Improved heat exchange capacity of the condenser coil

%

Reduction in energy usage

%

Reduced mechanical load on the condenser unit

%

Increased thermal efficiency

%

Improved indoor environment at a reduced price

THERMAL-XR Prep

THERMAL-XR Prep is a highly-concentrated combination de-ruster, degreaser and phosphator. It has been specially formulated to treat aluminium prior to the application of THERMAL-XR Restore.

DILUTION RATE: 1 litre makes 10 L ready to use (1:9).

USAGE RATE: 5 Litres ready to use to soak 1 sqm of coil face, front and back.

THERMAL-XR Activate

THERMAL-XR Activate is a highly-concentrated chromium-free conversion coating for Aluminium.  It has been specially formulated to treat aluminium prior to the application of THERMAL-XR Restore to enhance adhesion.

DILUTION RATE: 1 litre makes 50 litres ready to use (1:49)

USAGE RATE: 5 Litres ready to use to soak 1 sqm of coil face, front and back.

THERMAL-XR Restore

THERMAL-XR Restore is a direct to metal acrylic that has been specifically formulated to strongly adhere to HVAC and Refrigeration coils. With the addition of thermally conductive particles the coating rebuilds lost thermal efficiency destroyed from corrosion and contamination of the coil.

USAGE RATE: 1 litre of THERMAL-XR Restore will coat 2 sqm of coil face. ie 1 sqm or coil back and front.

THERMAL-XR Maintain

THERMAL-XR Maintain is a passivated highly concentrated cleaner designed to remove dirt and contamination from the HVAC and refrigeration coil will not damaging the coating integrity or thermal properties.

DILUTION RATE: 1 litre makes 100 litres ready to use (1:99)

USAGE RATE: 5 litres ready to use to soak 1 sqm of coil face front and back.

THERMAL-XR is building a network of quality distributors and local applicators around the world to service the residential and commercial HVAC and Refrigeration Market.

THERMAL-XR
Unit 2/481-483 Victoria Street
Wetherill Park, 2164 NSW Australia
info@thermal-xr.com
+61 2 9756  1781